Introduction of Helium Leak Detector:
Helium leak detector is a professional gas leak detection device, specifically designed to detect helium leakage and quantify the leakage rate. It is designed to detect helium with quality 2, 3 and 4 (H2, He3, He4) with maximum allowable leak detection pressure of 1500 Pa. Helium Leak Detector is an ideal tool for those who need to detect and pinpoint helium leakage and provide reliable and accurate leak rate. It is an ideal choice for industrial applications, such as sniffer leak detection, leak testing, research and development, component testing, and gas systems maintenance.
Helium leak detector is a great choice for helium leak detection. The device is designed to provide reliable and accurate leak rate, and is suitable for a wide range of applications. It is perfect for industrial and research applications, as it can detect and pinpoint helium leakage quickly and accurately.
Technical Parameters of Helium Leak Detector:
| Helium Mass Spectrometer Leak Detector With 1500Pa Leak Detection Pressure |
| Detection Method | Helium Leak Detection |
| Ion Source | 2pcs,Iridium Coated Yttrium Oxide, Automatic Switching |
| Response Time(s) | <1 |
| Operating temperature | 0~40°C |
| MES Interface | Standard |
| Max Allowable Leak Detection Pressure (Pa) | 1500Pa |
| Product Name | Helium Leak Detector |
| Leak detection port | DN25KF |
| Detectable Quality | 2, 3, 4 (H2, He3, He4) |
| Diamension | 645*678*965mm |
| Minimum Detectable Leak Rate(Pa·m3/s) Vacuum Mode | 5.0x10-13 Pa·m3/s |
| Minimum Detectable Leak Rate(Pa·m3/s) Sniffer Mode | 5.0x10-9 Pa·m3/s |
| Startup Time (s) | ≤2 min |
| I/O Input/Output | 8 Inputs and 8 outputs |
| Communication Interface | RS232/485, USB*2 |
| Power Supply | AC220V, 50Hz/60Hz |
| Language | Chinese and English |
Applications of Helium Leak Detector:
Power System: engine water/oil channel, cylinder head valve, spark plug, powertrain, rear oil seal, oil pan, heat flow tube, oil filter, air filter, oil pump housing/assembly, water pump housing/assembly turbocharger,etc.
New Energy Industry
Charging gun, pack battery pack, motor, water cold plate, controller, wiring harness, connector, bipolarplate, electric pile, hydrogen channel, oxygen channel, waterway, etc.
Support and Services:
Helium Leak Detector Technical Support & Service
Our team is here to provide technical support and service for your Helium Leak Detector. We provide a wide range of services, including installation and calibration, maintenance and troubleshooting, and repair and replacement of parts. We also provide training and advice to ensure that you are using the Helium Leak Detector correctly.
Methods of Leak Detection
Negative Pressure Method
Vacuum Chamber Helium Leak Detection and Recovery System (external filling)
Sniffer Method
